Echo LOP Spacer Set & Thumbscrew: This is a kit for those who want to upgrade their Echo with length-of-pull (LOP) spacers and a Four Lobe Thumbscrew for tool-less cheekpiece adjustment. The Echo Chassis has a LOP of approximately 12.9" with no spacers and just over 14" with three installed. Each spacer is 3/8" thick. All LOP hardware is included.

Fits: Echo, Bravo and X-Ray Chassis (Ships standard on all current Bravo and X-Ray Chassis)

Material: Reinforced polymer.

Made by KRG

The post Echo LOP Spacer Set & Thumbscrew appeared first on MARCH Scopes.

Echo Barrel Channel Narrow. Fits up to a "sporter" barrel contour. The Narrow Barrel Channel is 0.90" at the end of the forend (~10.75" from the front of the receiver).

Fits: Echo Chassis only
Material: Polymer

Made by KRG

The post Echo Barrel Channel Narrow appeared first on MARCH Scopes.

The Bolt Lifts for the Remington® 700™ are the first and only products of their kind. They give you all the benefits of an oversize bolt knob (AKA "Tactical" knob) in a simple user friendly package. Adding an enlarged bolt knob to a rifle is a popular upgrade that gives a better grip when operating the bolt under any conditions. Previously, if you wanted that improved bolt handling you would have to buy a knob and send your bolt off to a gunsmith who would cut and thread your bolt handle and install your new knob. Now, you can add a durable enhanced knob by yourself, and you don’t have to permanently modify your rifle.

The Bolt Lift consists of two reinforced polymer knob halves and some supporting parts. Users can choose between a permanent installation using epoxy, a rock solid removable setup, or a quick simple install using the supplied spacers to tailor the fit of the Bolt Lift to the factory bolt handle. A stainless steel screw to clamp the knob halves together and some reinforcing pins round out the package.

We have selected a very strong, reinforced polymer material and incorporated it into a thick-walled, high strength design to ensure that your Bolt Lift will be the last part on your rifle to fail. As an added benefit, the polymer construction will isolate your hand from environmental effects.

Differences between the Bolt Lift original and the SV (Small Version): The SV is more compact and sleek. The difference is not huge, there's only so much shrinking we can do with something that fits around the existing Remington handle. The SV also has an enhanced grippy surface to help in adverse conditions.

Materials and finish:

All metal parts are stainless steel
Bolt Lift halves are reinforced polymer
Installation is simple and can be accomplished with basic tools which include: Hex (Allen) wrench- 5/32

Made by KRG

This item is restricted for export outside the US under ITAR regulations

The post Bolt Lift appeared first on MARCH Scopes.

The Bolt Lift and Bolt Lift SV (Small Version) for the Remington® 700™ are the first and only products of their kind. They give you all the benefits of an oversize bolt knob (AKA "Tactical" knob) in a simple user installable package. Adding an enlarged tactical bolt knob to a rifle is a popular upgrade that gives a better grip when operating the bolt under any conditions. Previously, if you wanted that improved bolt handling you would have to buy a knob and send your bolt off to a gunsmith who would cut and thread your bolt handle and install your new knob. Now, you can add a durable enhanced knob by yourself, and you don’t have to permanently modify your rifle.

Bolt Lift SV (Small Version) consists of two reinforced polymer knob halves and some supporting parts. Users can choose between a permanent installation using epoxy, a rock solid removable setup, or a quick simple install using the supplied spacers to tailor the fit of the Bolt Lift to the factory bolt handle. A stainless steel screw to clamp the knob halves together and some reinforcing pins round out the package.We have selected a very strong , reinforced polymer material and incorporated it into a thick-walled, high strength design to ensure that your Bolt Lift will be the last part on your rifle to fail. As an added benefit, the polymer construction will isolate your hand from environmental effects.

Differences between the Bolt Lift original and the SV (Small Version): The SV is more compact and sleek. The difference is not huge, there's only so much shrinking we can do with something that fits around the existing Remington handle. The SV also has an enhanced grippy surface to help in adverse conditions.

Materials and finish:

All metal parts are stainless steel
Bolt Lift halves are reinforced polymer
Installation is simple and can be accomplished with basic tools which include: Hex (Allen) wrench- 5/32

Made by KRG

This item is restricted for export outside the US under ITAR regulations

The post Bolt Lift SV appeared first on MARCH Scopes.

The Arca Rail Short is a short version of our Arca Rail. It is for mounting onto KRG Spigot Mounts (without an integral Arca Rail) so you can add the Arca Rail to your existing spigot Mount.

The KRG Arca rail gives you Arca-Swiss rail functionality for your Non-ARCA Spigot Mount. It's low profile, light weight, and unobtrusive. Attach your bipod to our Arca Clamp or another brand's clamp and quickly remove or re-position for the next stage.

Fits: KRG Spigot Mounts only

Restrictions: Use as many fasteners as possible to mount the rail to maintain rigidity.

Weight: 1.4oz

Length: 3.6"

Material: 7075 Aluminum

Made by KRG

The post ARCA RAIL SHORT appeared first on MARCH Scopes.

The Arca Rail XL is a longer version of the Arca Rail for mounting on the Enclosed forend only (NOT FOR USE WITH OUR STANDARD FOREND).

The KRG Arca rail gives you Arca-Swiss rail functionality for your KRG Whiskey-3, X-ray, or Bravo chassis. It's low profile and light weight and mounts to the bottom of the forend without being obtrusive. There are limitless possibilities for mounting and positioning acessories to your chassis with this rail. Attach your bipod or our Barrier Multi-tool to our Arca Clamp or another brand's clamp and quickly position your item anywhere along the rail, for example. You can easily remove or re-position for the next stage or even during a stage.

Fits: **KRG ENCLOSED FOREND ONLY** not for use with standard chassis forends!

Restrictions: Use as many fasteners as possible to mount the rail to maintain rigidity.

Weight: 4.8oz

Length: 13.7"

Material: 7075 Aluminum

Made by KRG

The post ARCA RAIL XL (KRG) appeared first on MARCH Scopes.

The post ARCA CLAMP (KRG) appeared first on MARCH Scopes.

The Atlas Bipod Adapter will mount your Atlas (No Clamp) Bipod to the bottom of the KRG ARCA CLAMP giving you the flexibility to position your bipod where you need it.

Fits: Direct mounts to Rev 06 ARCA CLAMPs (Sold Sept 2021 and later). Will work with older ARCA CLAMPS with some modification.

Restrictions: Not compatible with Atlas bipods with 1913 Picatinny mounts.

Weight: 1.2oz

Material: Aluminum

Made by KRG

The post ATLAS BIPOD ADAPTER appeared first on MARCH Scopes.

The ∆-Lug Arca Clamp (pronounced "Delta Lug) is a proprietary system that offers the user a movable non-slip accessory mounting platform for their precision rifle. The push button locking lug ensures that the clamp stays in place and won't slip under recoil. A mounted bipod or barrier stop can quickly be repositioned along the ∆-Lug compatible ARCA rail with just the push of a button. The side mounted thumbscrew can be used to adjust the clamp tension giving the user a wide range of control over the "feel" while repositioning the unit.

Fits: C-4 Chassis and Enclosed ARCA Forend at this time, with more options coming soon.The ∆-Lug Arca Clamp can be used with standard ARCA-Swiss style rails, but the locking lug function will be inactive.

Accommodates mounting of: KRG L2 rail, Inline Harris Bipod Direct Mount, Atlas Arca Adapter.

Weight: 6oz

Material: 7075 Aluminum

Made by KRG

Patent Pending

The post ∆-LUG ARCA CLAMP appeared first on MARCH Scopes.

Barrier Stop is a handy device to aid in positional shooting from a barrier. It can be mounted in several positions on the bottom of the forend of the Whiskey-3, X-ray, and Bravo chassis. It has one convex side and one less convex side so the shooter can choose which side faces forward.

Fits: Whiskey-3, X-ray, and Bravo chassis

Restrictions: None

Weight: 0.6oz

Material: 6061 Aluminum, hard anodized

Made by KRG

The post BARRIER STOP appeared first on MARCH Scopes.